€ 14,500.00
The Autoflame MM10070 is a high-torque industrial rotary electric actuator designed primarily for feed water valve control in combustion and boiler systems. With a nominal output torque of 40 Nm (37 ft-lbs) at 230 V 50/60 Hz, it delivers robust performance for heavy-duty water control valve actuation.
In stock
Overview
The Autoflame MM10070 is a high-torque industrial rotary electric actuator designed primarily for feed water valve control in combustion and boiler systems. With a nominal output torque of 40 Nm (37 ft-lbs) at 230 V 50/60 Hz, it delivers robust performance for heavy-duty water control valve actuation. The unit features a manual override crank handle, a built-in thermal motor protector, IP65 rated die-cast aluminium housing, and is engineered for reliable operation in industrial environments.
Key Features
Output torque 40 Nm (37 ft-lbs)
Supply voltage 230 V AC, 50/60 Hz
Built-in manual crank override handle
Thermal overload protection to prevent motor burnout
Die-cast aluminium housing with industrial finish and IP65/NEMA4X rating
Suitable for feed-water valve actuation in boilers, steam plants and heavy-duty combustion systems
Compatible with Autoflame MM controller systems and related valve assemblies
Main Benefits
High torque ensures reliable movement of large feed-water control valves where standard actuators cannot cope
Rugged construction and industrial rating housing provide long service life under harsh conditions
Manual override allows servicing or manual operation during maintenance or power outage
Designed for seamless integration with existing Autoflame valve and actuator systems
Minimises downtime and ensures accurate control of feed-water flow for steam/burner applications
Technical Highlights
Part number: MM10070
Nominal torque: 40 Nm (37 ft-lbs)
Supply voltage: 230 V AC, 50/60 Hz
Operating angle: 0° to 90°
IP rating: IP65 / NEMA4X
Ambient temperature: approx. –25 °C to +55 °C
Orientation: 360° mounting capability
Manual override crank included
Installation & Safety Notes
Installation must be carried out by qualified personnel, following local electrical and boiler/combustion safety regulations.
Ensure correct mechanical coupling between actuator shaft and valve linkage; check torque and travel limits.
Confirm supply voltage, wiring and grounding are correct before commissioning.
Ensure mounting location meets ambient and service environment requirements (e.g., temperature, vibration, ingress protection).
Regular inspection and maintenance recommended to verify travel, actuator alignment, and absence of mechanical binding.
Applications
Feed-water control valve actuation in boiler or steam plant systems
Heavy-duty valve or damper control in industrial combustion systems
Retrofitting older systems requiring high-torque actuator for water valves
Systems where reliable manual override and industrial duty cycle are required
| Weight | 2 kg |
|---|---|
| Dimensions | 16 × 12 × 12 cm |
